UPGRADE: WISECO BOOSTLINE CHEVY RODS W/TOOL STEEL WRIST PINS

$1,150.00

97 in stock

Category:
UPGRADE: WISECO BOOSTLINE CHEVY RODS W/TOOL STEEL WRIST PINS
UPGRADE: WISECO BOOSTLINE CHEVY RODS W/TOOL STEEL WRIST PINS - Image 2
UPGRADE: WISECO BOOSTLINE CHEVY RODS W/TOOL STEEL WRIST PINS - Image 3

Description

NEW TEST PIC. 2020
UPGRADE TO WISECO BOOSTLINE RODS WITH JE TOOL STEEL WRIST PINS 6.00, 6.385, 6.700 INCH WITH ARP 2000 CAP SCREWS.

Do not purchase this item unless you are buying one of our 572 rotating assemblies, short block kits, or engines.

This is an upgrade for those that have purchased a rotating assembly, short block kit, or engine from our other listings.

IMPORTANT NOTE!

To be perfectly clear, this ad is NOT for the stand-alone purchase of this item. This is an upgrade only available to customers that have purchased one of our rotating assemblies, short block kits, or engines. 

Do not click the buy it now on this item unless you have a rotating assembly, short block kit, or engine already in your shopping cart.
WISECO BOOSTLINE RODS WITH JE TOOL STEEL WRIST PINS WITH ARP 2000 CAP SCREWS. BUSHED, 7/16’s CAP SCREWS. EXTREME DUTY. 4340 CUSTOM ALLOY.

For those wanting ultimate protection in their engine, this is the answer. The Pro-Pac kit comes with the Wiseco BoostLine rods and tool steel thick wall wrist pins. This is an excellent upgrade for thos running any type of forced induction, (blowers, nos, twin turbo, high compression builds). This is also an excellent upgrade for those running naturally aspirated engines. Rod and or wrist pin failures will usaully cause catastrophic damage to the engine. The Pro-Pac kit can handle horse power levels in the 2,000 range. The 4340 alloy has been through a very special heat treating process. These rods are what we use on all of our high HP applications. As mentioned this is also an excellent upgrade for medium HP builds that may encounter some hard run time. BBC engines that have been stroked above 4.250 can greatly benefit from this setup. It’s well known that engines with long stroke cranks have a greatly increased load on the rods and wrist pins when encountering rpm in the upper ranges.
photo BOOST 3.jpg


BoostLine connecting rods are designed from the ground up for high-power forced induction and nitrous applications. A patented 3-pocket design, forged from a special 4340 alloy, maximizes strength while minimizing rotating weight. This revolutionary design dramatically improves the rod’s big-end stability under tensile loads and provides a 60% improvement in bending strength and 20% stress reduction in tension compared to H-beam designs. All of these benefits make BoostLine rods ideal for high-cylinder pressure engine combinations. 


In addition to BoostLine’s innovative design, comprehensive real-world testing, finite element analysis, and meticulous quality control ensure that all BoostLine rods are fit for 2,000-plus horsepower (8-cylinder applications).


All BoostLine rods include high-quality ARP 2000 bolts. Every rod is inspected and finish-honed in America in addition to being analyzed on a Zeiss CMM as part of the final inspection. A detailed inspection report measuring to .0001 in. is provided with every set of BoostLine rods. 


photo WRIST PINS 1.jpg


For high-impact, drag race, and endurance applications, JE Pistons offers the Series 52 wrist pins. These pins are constructed from 52100 high carbon bearing steel and through-hardened for added stability. All JE pistons are super-finished on both the outside and inside diameters to help reduce piston pin bore wear and minimize fatigue cracking, adding to the overall strength and reliability of the wrist pins. Employing the latest in technology and quality control, the Series 52 wrist pins are checked for the tiniest flaws and to ensure the roundness of each pin. JE Pistons Series 52 wrist pins are available in a variety of lengths, diameters, and wall thicknesses. They are specifically developed for use with JE pistons.


Balanced
Set

Yes 

Big End
Bore Diameter (in)

2.3250
in.

Big End
Width (in)

0.992
in.

Cap
Retention Style

Cap
screw

Clearanced
for Stroker

Yes

Connecting
Rod Beam Style

 CUSTOM SUPER DUTY I BEAM.

Connecting
Rod Bolt Brand

ARP

Connecting
Rod Bolt Diameter

7/16
in.

Connecting
Rod Bolt Head Style

12-point

Connecting
Rod Bolt Material

ARP-2000

Connecting
Rod Length Center to Center

WHATEVER LENGTH NEEDED.

Connecting
Rod Material

Forged
4340 steel

Fastener
Yield Strength (psi)

200,000
psi

Magnafluxed

No

Notes

Pin End
Bore Diameter

0.990
in.

Quantity

Sold as
a set of 8.

Remanufactured

No

Rod
Journal Diameter (in)

2.200
in.

Weight
Matched Set

Yes

Wrist
Pin Style

Floating/Bronze
bushed.

    • We are not responsible for collateral damage caused by the use of this product.

      NOTE: THIS IS AN UPGRADE TO THE RODS INCLUDED WITH OUR 572 BBC ROTATING ASSEMBLIES, SHORT BLOCK KITS AND ENGINES. THIS ITEM IS LISTED IN OTHER LISTINGS AT FULL PRICE FOR SEPARATE PURCHASE.

      To be perfectly clear, this ad is NOT for the stand-alone purchase of this item. This is an upgrade only available to customers that have purchased one of our 572 rotating assemblies, short block kits, or engines. 

      Do not click the buy it now on this item unless you have a rotating assembly, short block kit, or engine already in your shopping cart.

       

 
VisaMasterCardDiscoverAmerican Express

Additional information

Rod Bearing Size

STANDARD SIZING
Manufacturer Part Number

PRO-PAC.
Surface Finish

4340 & 52 SERIES TOOL STEEL WRIST PINS
Brand

WISECO BOOSTLINE & JE

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products