Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16

$80.95

99 in stock

Categories: ,
Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16
Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16 - Image 2
Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16 - Image 3
Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16 - Image 4
Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16 - Image 5
  1. Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16
  2. Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16 - Image 2
  3. Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16 - Image 3
  4. Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16 - Image 4
  5. Comp Cams Valve Spring Retainers Full Set of 16 VTH # 740-16 - Image 5

Description

NEW TEST PIC. 2020

photo compcamlogo.jpg

COMP CAMS # 740-16 VALVE SPRING RETAINERS. FULL SET OF 16.


For use with 10 degree valve locks.

photo 663B6454_1.jpg

photo 105374e7-34e3-4d3a-947b-ff1a5e3b1375.jpg 

The above picture is a file photo. Actual appearance may vary.

   

Important Note.

These are the exact retainers we use on all of our sbc and bbc heads running hyd. flat tappet and hyd. roller cams. The Comp retainers are made in the USA from start to finish. We have found variances in offshore retainers that are totally

 unacceptable. These variances were up to .045 from one retainer to the next. The angle of the center hole was usually off by several degrees, and would cause the valve locks to not properly mate up with the retainers. This could easily cause the valve locks to let loose under the right conditions. We now use only USA made retainers, and have noticed near zero variances in the Comp Cams line of retainers. We recommend using our Comp Cams 10 degree Super Valve Locks # 611-16 with these retainers for a perfect fit.


These retainers are a perfect fit for our # Melling 272 single or # Melling 274 dual springs, as well our # Comp 987-16 high performance springs. Most springs with an outer diameter of approx. 1.430″ will accept this retainer. Some valve springs may have a slightly larger outer diameter due to the size of the spring wire used to make them. That is not a problem for this retainer. If your springs are in the approximate range of 1.500 give or take, we also offer those retainers in our other listings. Those size springs are usually ran on solid roller setups.

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with FEA to design retainers with a modern and advanced contoured top profiling for lower stress, increased lift and a reduction in mass. The retainers are CNC-machined to exact tolerances using CAD/CAM software. All COMP® retainers use only high-grade SAE 4140 chromoly steel with no lead, <0.04% sulfur and a black oxide finish to prevent corrosion. COMP Cams® Steel Valve Spring Retainers offer both unmatched looks and superior performance that set the industry standard.

ADDITIONAL DETAILS

  • Use With Valve Spring Outside Diameter (In) approx: 1.430-1.440 Inch
  • Retainer outside diameter: 1.060
  • 10 degree valve locks are to be used.
  • Will work with single or dual springs.
  • Most popular retainer size on the market.

BRAND INFORMATION

From the
asphalt tracks of NASCAR to local dirt tracks and drag strips to your personal
garage, COMP Cams has made a promise to all performance enthusiasts to engineer
and produce the best camshafts available for your application.

MANUFACTURER INFORMATION

For more
than 35 years, the COMP Cams® mission has never changed: to produce the
highest-performing products possible, provide customers with superior service,
and to lead the industry in technological development. While the COMP
Performance Groupâ„¢ has grown to multiple companies and hundreds of employees,
they still retain the competitive spirit and desire to be the very best that
has positioned COMP Cams® as the absolute leader in valve train components.

COMP Cams® has never forgotten that performance is defined by results – both at
the track and on the street. COMP Cams® is driven by technology. The
integration of research, engineering and development at COMP Cams® is what we
call our “Systems Technology” and it consistently proves itself by
out-performing the competition. Whether you’re looking for horsepower,
reliability, or gas mileage, COMP Cams® has the products that will deliver.

We purchase most of our valve train hardware in bulk for our engine program. Therefore, they will come to you in our packaging on most occasions. Below are copies of our invoices from Comp Cams showing our rather large purchases of valve train hardware. We have removed the price and our account number for privacy reasons. This is the best way we can prove to our customers that the valve train products we use and sell are genuine Comp Cams products.

8/3 retainers photo 326c909e-a319-442a-98b9-1a034e79efdf.jpg

photo 75b6aaaf-4a3a-4df0-86af-982fccac19c1.jpg
photo b811688e-81a6-45eb-9ced-06b669de7f1c.jpg

photo 2d5342c5-dc7c-4d95-8d81-4527c484a257.jpg 

 

Very Important Note!

Our sales staff has limited technical knowledge on this product and are usually unable to answer many of the questions asked. See our other listings for our other variations of this product.

    • We are not responsible for collateral damage caused by the use of this product.

       

RETURN POLICY


Should a problem occur, please contact us. If a return is necessary, please contact us for an RGA number and return authorization. The RGA number must be included on the return label. If an item is returned without an RGA number, it will not be processed. A full description of what the problem is needs to be included with any returned product with your contact info, and proof of purchase. Even though you may have explained the problem to us, and been granted permission to return the product, we must have a written explanation and a contact number included with the product. It is also recommended that you include the name of the person from our company that you have been in contact with. You must send the item back to us in a trackable manner (USPS Priority Mail, FedEx, etc.) and keep the tracking info of the returned product. Please give ample time for returns to be processed. Following these guidelines will make the return process work as it should.  


PAYMENT AND SHIPPING DETAILS.

 

We offer great discounts on shipping. You only pay the full shipping fee on the highest shipping cost of your items, and HALF PRICE shipping on all additional items. Few offer discounts on shipping such as this. Our checkout system will automatically calculate your shipping discount at the time of final payment, providing you consolidate your payment.


You may receive a verification and tracking number shortly after purchase, but this does not necessarily mean that your product has shipped. It would be fair to say that 98% of products will be going out the day the shipping label is issued. On occasion, the product may not ship out until the next day after the label has been issued. Most products purchased late in the day will not be shipped until the next day.  

 

If you checkout and start over, the auto calculator will not recognize the multiple purchases, and there will be no shipping discount. 

The shipping quoted in this ad is only for the 48 continental United States. If shipping to anywhere else, please contact us. The half price shipping on all additional items also only applies to items that are being shipped in the 48 continental United States.

 
Pay me securely with any major credit card through PayPal!
VisaMasterCardDiscoverAmerican Express


Related products