Mon.-Thurs. 8a-7p EST
Friday 8a-3p EST
Sat 10a-3p EST
Skip White Performance

3349 E. Stone Dr.
Kingsport, TN 37660

UPC: 6145-SATIN

SBC SATIN FABRICATED TALL ALUMINUM VALVE COVERS w/ ACCESSORY HOLES

$98.50

In stock (9 available)



SBC CHEVY 305 350 383 400 TALL ALUMINUM FABRICATED VALVE COVERS.

Satin/semi brushed finish.

 photo 42c63313-4a71-408b-96e3-9406d49f0934.jpg

THESE ARE TRUE ALUMINUM FABRICATED VALVE COVERS. The pictures below show what these look like on an engine. Most of our customers choose this style of valve covers on the engines we build. The quality is outstanding relative to the low cost. For those wanting a brighter/shinier finish, see our other listings for this same style valve cover with addition of "POL" at the end. The picture of the valve covers on the engine are closer to the actual appearance.

 photo 45456973-d1a6-497b-80ab-930234a564cf.jpg

As you can see in the picture below, these valve covers look great when painted. This particular engine is our company founder's engine for his blue Datsun 240z

 photo a705f81f-0781-4ab2-9ecb-1b133d6ec627.jpg

Part number 6145-Satin

Notice the high quality welding around the thick plate aluminum rail. Many fabricated valve covers on the market are not like this.

The welding is first class. The billet rails on these valve covers are approx. .225" thick. The aluminum sheet metal is approx. .075" thick. We know many on the market to be much thinner in these areas. This is why many other sellers fail to mention these specs.

 photo 1199f838-6695-4f19-aefd-732c240c0e35.jpg

As you can see in the picture below, these valve covers have a thick billet rail and an internal baffle.

 photo 168985e4-647a-4040-bedc-3e7a78bad0c6.jpg

You will have to remove the internal baffle in the valve covers when using stud girdles.

Pictured below is how these look on one of our engines. This style of valve cover ends up on many high end show cars and high performance drag cars.

The breathers you see on the engine are not not included. We offer this exceptional pair of breathers, (oil fill side & pcv side) in our other listings, part number BR-25-Kit. The kit comes with the correct size grommets. We also offer the chrome mini nut stud kit to secure the valve covers onto the engine. The mini nuts look great on these type valve covers, and are of great benefit when using thicker than normal valve cover gaskets. All of our engines use the billet breathers and mini nut set.

 photo GOLDSTUDGIRDLES020-1.jpg

OUR MOST POPULAR VALVE COVERS

Painting these valve covers are not a problem. We have painted them for many of our customers who have purchased an engine from us.

 photo 3b081621-58bb-4c4d-96bf-7bfc8e5c570b.jpg

You will receive the valve covers only as pictured in the top of the ad.

These are a top seller at our store.

These valve covers are 3.25" tall on the inside, not including the valve cover gasket. Most vc gaskets on the market are approx. .175" thick, and this brings the total height to 3.425". There are extra thick gaskets available that will bring the height to approx. 3.550", and will certainly clear most any stud girdles and roller rockers on the market with ease. Our Gold Series stud girdles have oversized bars that are wider then most and these valve covers clear them with the use of the regular .175" thick vc gaskets.

Our engine room has reported to us that using the extra thick gaskets not only seals around the rails much better than the regular ones, but that the additional thickness allows better clearance for the stud girdles and is of great benefit when adding oil to the engine. The stud girdles are usually very close to the opening in the valve covers when using the regular valve cover gaskets. The part number for the extra thick gaskets is 7483-ET.

If you have AFR heads, you must run the extra thick valve cover gaskets due to the outer rail design on these type heads. The AFR outer rail sits lower than many other heads on the market and this causes these valve covers to require the use of the extra thick gaskets to clear stud girdles.

These valve covers are made from aluminum plate/sheet, not cast aluminum. They have a true billet aluminum rail, not folded over sheet aluminum as many do. There are many similar valve covers on the market, and some are inferior by comparison from what we have seen.

*

Important Note.

We have used these valve covers on thousands of our high performance engines for over 10 years without any issues. On occasion, you may notice a slight degree of warpage on the rails before installation. This is due to the heat generated by the massive amount of welding done around the outer edge of the rails. This warpage is not a problem. When the valve covers are bolted on, they will pull down flat and seal well. Any micro amounts of variation left over after you have bolted them down will be compensated for by the gaskets. Any and all fabricated valve covers with such welding on the rails will have this characteristic. It's simply not a problem in the least. We dyno many of the engines using these valve covers. The engines are brought up to considerably high rpm levels, and rarely do we ever see any signs of oil seepage. They seal very well. The extra thick valve cover gaskets we use do an excellent job of sealing around the valve covers: Part number 7483-ET. See our other listings for these. Every engine we build uses the extra thick gaskets.

When we dyno a brand new engine, the crankcase pressure is higher than normal until the engine rings seat. This causes the oil to seep from any possible exit on the engine, such as around the valve covers and gaskets. We had always used our regular black neoprene gaskets on the engines but on occasion had to use the extra thick ones due to stud girdle clearance with certain heads. Our engine builders noticed that the extra thick valve cover gaskets had virtually zero seepage as compared the regular neoprene gaskets. As we see it, the extra thick gaskets are the key factor in eliminating seepage. Extra thick valve cover gaskets also give the engine a more pronounced (wide/tall) appearance.

The finish on these valve covers may on occasion have very minor cosmetic flaws on them. In the world of mass production, it's to be expected. The massive amount of welding on the rails can sometimes leave small spatter marks in some areas. You may also see very minor scratches in the finish. These flaws are only noticeable upon close observation. Once mounted on the engine, these very small cosmetic blemishes are not noticeable from a distance of several feet. In most cases, the valve covers are flawless or nearly flawless. There are some very high end fabricated valve covers on the market that cost four to five times as much, and on those you may even find minor flaws, but it's less likely due to their extreme cost. As mentioned above, you cannot see these minor flaws from the normal viewing distance standing in front of the car.

******************************************************

These valve covers will certainly clear most any stud-girdles and roller rockers on the market. Our Gold Series stud girdles have oversized bars that are wider than most and these valve covers do clear them with ease.

You will have to remove the internal baffle in the valve covers when using stud girdles.

 photo STUDG006_crop-1.jpg

The rocker studs used in our engines are the ARP long version, as that is what is required for the huge/thick Comp High Energy rockers. Even when topped off with the oversized stud girdles, including the tall poly locks, there were no clearance issues for these valve covers when using the extra thick valve cover gaskets. We have used over 1500 sets of these or similar style valve covers on our sbc engines, and used as many 5 different popular styles of roller rockers and yet to have an interference issue. This is not to say you will never encounter some interference with certain rockers on the market, but the Comp High Energy rockers and the huge Scorpion race series have given no problems and they are far from small in size. It would be fair to say that there are few if any roller rockers or stud girdles on the market that will give you a problem with these valve covers.

The picture below is one of our engines with the large Comp High Energy rockers and our oversized stud girdles that will be topped off with a set of these style valve covers. Also notice that we have the stud girdles set high up on the on the poly locks and clearance is still not a problem. Our engines all use 200 long valves, with 1.46 diameter springs. This makes valve cover fit even more challenging. The valve cover gaskets we now use are thicker than normal.

 photo GOLDSTUDGIRDLES040.jpg

You will have to remove the internal baffle in the valve covers when using stud girdles.

A few more pics below of these valve covers on our engines.

Photobucket

These were taken outdoors in mild to moderate sunshine.

Photobucket

See our other listings for many valve cover accessories.

Product Information

UPC6145-SATIN
Product TypeValve Covers
Price (excl. tax)$98.50
Price (incl. tax)$98.50
Tax$0.00
Availability In stock (9 available)
Baffled Yes
Breathers Included No
Block SBC
Brand TSP
Color Clear
Finish Satin / Semi-Bright
Gaskets Included No
Height 3.25
Material Aluminum
Mounting Hardware Included Yes
Notes

These valve covers are 3.25" tall on the inside, not including the valve cover gasket. Most vc gaskets on the market are approx. .175" thick, and this brings the total height to 3.425".

Shipping Cost 18.5
Number of reviews 0

Customer Reviews

This product does not have any reviews yet.