|Product Type||Shipped Product|
|Number of reviews||0|
SBC CHEVY 327 350 383 400 TALL ALUMINUM FABRICATED VALVE COVERS.
LONG BOLT STYLE.
These valve covers will clear most any stud-girdles and roller rockers on the market. Our Gold Series stud girdles have oversized bars that are wider then most and these valve covers clear them with ease.
Notice the high quality welding around the thick plate aluminum rail. Many fabricated valve covers on the market are not like this.
The welding is first class. The billet rails on these valve covers is approx. .225" thick. The aluminum sheet metal is approx. .075" thick. We know many on the market to be much thinner in these areas. This is why many other sellers fail to mention these specs.
Very well constructed inside. Notice the thick billet rails, and internal baffles. If your running a set of stud girdles, you will have to remove the baffles. They are very simple to remove with the use of a dremel tool.
Mounting hardware is included.
THIS IS A SET OF TRUE TALL ALUMINUM FABRICATED VALVE COVERS.
The quality is outstanding relative to the low cost.
Part number 8091-7CA
These valve covers are 3.45" tall on the inside not including the valve cover gasket. Most vc gaskets on the market are approx. .175" thick, and this brings the total height to 3.625". There are extra thick gaskets available that will bring the height to approx. 3.75", and will certainly clear most any stud-girdles and roller rockers on the market with ease. Our Gold Series stud girdles have oversized bars that are wider then most and these valve covers clear them with ease with the use of the regular .175" thick vc gaskets.
These valve covers are made from aluminum plate/sheet, not cast aluminum. They have a true billet aluminum rail, not folded over sheet aluminum as many do. There are many similar valve covers on the market, and some are inferior by comparison from what we have seen.
The rocker studs used in our engines are the ARP long version as that is what is required for the huge/thick Comp High Energy rockers, and topped off with the over sized stud girdles including the tall poly locks had no clearance issues for these valve covers. We have used over 1500 sets of these or similar style valve covers on our sbc engines, and used as many 5 different popular styles of roller rockers and yet to have an interference issue. This is not to say you will never encounter some interference with certain rockers on the market, but the Comp High Energy rockers, and the huge Scorpion race series have given no problems and they are far from small in size. It would be fair to say that there are few if any roller rockers or stud girdles on the market that will give you a problem with these valve covers. The picture below is one of our engines with the large Comp High Energy rockers and our over sized stud girdles that will be topped off with a set of these style valve covers. Also notice that we have the stud girdles set high up on the on the poly locks and clearance is still not a problem. Our engines all use 200 long valves, with 1.46 diameter springs. This makes valve cover fitment even more challenging. The valve cover gaskets we use are normal thickness, but in some instances you may encounter a fitment issue and the use of thicker valve cover gaskets becomes an instant cure in most cases. AFR heads will require the thicker valve cover gaskets due to the higher than normal spring pocket height.
These valve covers are made from aluminum plate/sheet, not cast aluminum. They have a true billet aluminum rail, not folded over sheet aluminum as many do. There are many similar valve covers on the market, and many are inferior by comparison from what we have seen.
The long bolt style valve covers can be difficult to install if a special procedure is not followed. You must start each bolt with no more than a half turn into the threaded holes in the cylinder head. The welded tubes in the valve covers that the long bolts go through are usually not in a perfect line with the threaded holes in the cylinder head. These tubes usually shift slightly when welded to the frame work on the inside of the valve cover. By starting each one of the long bolts with no more than one half turn, you will be able to move the valve cover into position to allow each one of the other bolts to start into the threaded holes in the cylinder head. After you have all the bolts partially screwed into each hole in the cylinder head, you should not have a problem screwing each bolt all the way into the threaded hole in the cylinder head. Each tube will draw itself into the exact position, and the tubes will stay in the correct position even when the valve covers are removed. If you start any of the long bolts with more than one half turn, then there is a great chance you will run into a problem. The intense heat from the welding is what causes this. We have experienced this with all long bolt valve covers on the market.
We have used these valve covers on thousands of our high performance engines for over 10 years without any issues. On occasion, you may notice a slight degree of warpage on the rails before installation. This is due to the heat generated by the massive amount of welding done around the outer edge of the rails. This warpage is not a problem. When the valve covers are bolted on, they will pull down flat and seal well. Any micro amounts of variation left over after you have bolted them down will be compensated for by the gaskets. Any and all fabricated valve covers with such welding on the rails will have this characteristic. It's simply not a problem in the least. We dyno many of the engines using these valve covers. The engines are brought up to considerably high rpm levels, and rarely do we ever see any signs of oil seepage. They seal very well.
This product does not have any reviews yet.