Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

M-F 8a-7p EST
Sat 10a-3p EST

5 star rating
260,500+ reviews!

 423-722-5152

FORD 351C 429 460 PRO BILLET SMALL DISTRIBUTOR 6606-R

$47.95

Available

125 customer reviews  



Product Information

UPC370536375790
Product TypeShipped Product
Shipping Cost $10
Number of reviews 125
PRO BILLET FORD 351C CLEVELAND 460 DISTRIBUTOR

Photobucket

This unit is a must for engines running cams that are several steps above stock. Read this ad completely before you call or email us with questions, please.

Mechanical weights and springs are setup for optimal performance. No vacuum advance on this unit. Most engines with medium to serious cams do not benefit from, need, or desire a vacuum advance.

This is not a stand-alone distributor. It is intended for use with a CDI-type box, such as the MSD 6A or 6AL, as well as an external coil. This distributor can be used with any brand CDI box. It has a universal butt connector type plug. We have noticed that phasing can vary from one brand of CDI box to another, so you must experiment with this. If you happen to hook it up wrong, that will not damage it at all. You will notice the engine not running correctly above 3000 rpm. Just swap the wires and reset the timing. Most serious hot-rodders use this type of distributor, and it’s a must if you’re in the 350 and above hp range.

We installed one of these units on an engine that was on our dyno, back to back with an MSD unit, and gained about 3 hp. This could have been due to the unique advance curve. We would have been satisfied with no gain against the very expensive MSD.

CALL FOR TECH INFO IF NEEDED, 423-722-5152

  • Length of shaft from the lip as it sits down in engine to the top of cap measures about 9 1/4in.

  • A billet of 6061 - T6 aluminum CNC is machined into a perfect housing for incredible strength, precision and looks.

  • Sealed ball bearings, sintered bushing, 1/2 inch hardened steel shaft.

  • Extremely accurate magnetic pickup which never requires adjustment.

  • Designed with a small base and cap to suit all makes and models.

  • This is mainly used in high performance vehicles which have space limitations around the engine.

CAPACITIVE DISCHARGE IGNITION (CDI) IS ESSENTIAL FOR MAXIMUM PERFORMANCE. ENGINES WITH HIGH LIFT CAMS, SEVERAL STEPS ABOVE STOCK, CAN BENEFIT GREATLY, AS A CDI SYSTEM WILL BURN FUEL IN LOW RPM RANGE VERY EFFICIENTLY. YOU WILL NOT SEE ANY SERIOUS STREET ROD WITHOUT THIS TYPE SETUP.

Space does not allow a full explanation of all the benefits to running a CDI system. Just ask around, and you will see how many people have found this system to be a great improvement over HEI systems. Installation is very simple.

For those running an HEI that has been tapped into an MSD box, this is the distributor you need.

Firewall clearance is never an issue with this, as it has a small base body and cap. Those running tunnel rams and blowers will also benefit from the small base body and cap.

Many of you may already have an MSD box and coil, but need the distributor, and this distributor will work with any of the CDI units on the market.

As usual, we are very selective in the products we sell. This unit meets all of our requirements: quality, low price, & practicality.

For those needing technical info, please give us a call at 423-722-5152.

For those unable to use paypal, or having difficulty making the purchase, you may give a call at 423-722-5152.

Note from our co. President:

Read up on the many benefits of running this type ignition. You will be amazed at what you are missing. Engines with medium to aggressive cams cannot burn fuel in the low rpm range. This is due to the aggressive cam profile. CDI systems are a must. The multi spark function is the key to it all.

If you have a somewhat serious engine, and you’re running an HEI distributor, then it’s best to keep the hood closed, as this is the one thing that can be clearly noticed by those with knowledge of CDI systems. That says you do not have much going on in the engine, and if you do have a somewhat serious engine, then you are holding it back from its full potential. Poor performance and less drivability are the result of not having the right ignition system. Sorry to put it that way, but it's the truth. A CDI system indicates the possibility as well as the capability of serious horsepower. Even if your engine is not in the high cam range, this system will still offer an improvement over an HEI distributor.

Skip White

This distributor must use a CDI box and external coil to operate. It cannot operate with just a coil. All high performance ignition systems work this way. It takes three major components to complete this system. The CDI box does not provide the life-giving spark to an engine, it only dictates how it is to be given. The coil does all the work. This is of such great importance. Oil filled bottle style coils can't compare to an e-core transformer style coil. This coil is in our other listings. Call for application or tech support if needed, 423-722-5152. The e-core coil is not included, but is available in our other listings. The new coil will have a red anodized cover on it. These coils are the best money can buy, and we have them at an unbelievable price.

Skip's Datsun Z car uses this style of distributor. His car is running in the low 11's at the track, with our Stage One 428hp 350cid engine.

See all reviews

Customer Reviews

  1. From ebay user o***v

    fast shipping, the distributor looks good and fits the block fine. Thanks A+++++

    Reviewed by o***v on Dec. 5, 2016, 1:50 p.m. | Permalink

    This review has no votes.