Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

M-F 8a-7p EST
Sat 10a-3p EST

5 star rating
260,500+ reviews!

 423-722-5152

AMC JEEP 232 258 4.0 4.2 6 CYL HEI DISTRIBUTOR 6511-R

$53.95

Available

828 customer reviews  



Product Information

UPC371058611629
Product TypeShipped Product
Shipping Cost $10
Number of reviews 828

HIGH PERFORMANCE AMC JEEP 6 CYL.COMPLETE HEI DISTRIBUTOR, WITH CAP, AND 65,000 VOLT COIL

FITS 232 258 4.0 4.2 SIX CYLINDER ENGINES. SEE OUR OTHER LISTINGS FOR THE V-8 MODEL HEI. THIS AUCTION IS FOR THE 6 CYL. VERSION

Photobucket

Read this complete ad before purchasing this product. Before you ask any questions about this product, please read the "Important Note" in the lower section of this ad.

Fits 6 cyl. AMC carbureted engines only. See our other listings for the V-8 model.

HEI distributor. This is a must for those wishing to upgrade the ignition system from points, or the poorly designed electronic ignition that AMC came out with around 1974. This is a one wire distributor. Call 423-722-5152 for tech. info.

***AMC CAM GEAR WARNING***

MAKE SURE TO CHECK YOUR CAM GEAR. 95% OF MOST AMC APPLICATIONS CANNOT PUT A NEW DISTRIBUTOR GEAR WITH AN OLD CAM GEAR OR IT COULD DAMAGE THE CAM GEAR. FAILURE TO DO SO COULD BE VERY COSTLY TO YOU.

Lifetime warranty, unlimited mileage!

We are the no. 1 wholesale marketer of HEI distributors in the country.

We have many garages and speed shops that purchase these in case lots from us. We have the best HEI on the market.

Click on the purchases tab above, and you will be shocked as to how many people are buying this unit. We have noticed other units on the market, but few are of this quality. It is the no. 1 HEI on the market.

We have possibly sold more of these than anyone in the country. This is a totally revised unit.

Lifetime warranty, unlimited mileage!

Complete distributor. Our absolute best selling unit. This is the complete distributor body, shaft, gear, coil, cap, rotor button.

Read some of our past feedback from those who have purchased this unit, and you will be convinced of its quality and value.

This is the newest version on the market. This has the high output coil and is essential on any modified engine.

We do have the best HEI on the market. Our failure rate is nearly zero on this unit.

Notice the precision machine work on the distributor body. Many others are not like this. We have been very selective on our choice, as there are many HEI's on the market.

We have sold this same unit at our store for several years, and have many high performance engines in this area running this unit. The only difference is this is a much improved model.

We are in the performance business.

 photo 683f66c6-91c6-4074-be65-d018226a8e25.jpg

Fully CNC Machined
Adjustable vacuum advance canister to improve economy while cruising
Premium caps with brass terminals, and a low-saturation ignition module
High Output Coil
It also offers true spark alignment for instantaneous response at high RPM

    We offer a lifetime warranty on this distributor.

    This is the perfect upgrade for your classic AMC JEEP, or just part of a tune-up. Here are a few problems you are most likely to encounter when using an old distributor.

    • Excessive end shaft play
    • Bushing wear
    • Weak coil, worn or cracked cap, and button
    • Weak module
    • Corrosion buildup
    • Weakened advance springs
    • Gear wear
    • If going from points to HEI this alone is a huge upgrade

    All of the above can greatly affect the performance of your engine.

    Warning, you must run 12 volts to this unit. No ballast resistor is to be used. Most if not all point distributors used a ballast resistor in the power line. Do away with this or the HEI unit will not be receiving a full 12 volts. Use a volt meter to confirm this. Sometimes the ballast resistor is difficult to locate. You are better off running a fresh new 10 gauge power lead that is active when the key is in the crank and run position.

    These are just a few of the things that most old distributors have going on with them. For the low cost of a complete brand new one, it just makes little sense to use the original distributor. When we rebuild any early model AMC engine, we insist the customer purchase a new distributor. You will notice a performance difference in your engine if you have any of the above issues with your old distributor. All of the old HEI's we see have excess end play in the shaft. I'm sure the coils on them are not at full voltage. The Super Coil is much more than the OEM model. All car makers have dramatically improved the ignition systems on cars and trucks. This is an indication of how important good ignition is to an engine.

    This distributor also has the performance curve setup. Do not be misled into thinking other HEI's on the market are superior to this. If anything, they are most likely the older version. We have sold more HEI's than most others around, and we do our best to provide the newest models available.

    The part numbers for distributors beginning with 65 and 85 are interchangeable. The distributors are identical in every respect. We changed the artwork on the package to private labeling and our supplier had to change our part number to distinguish our private label (85 series) from the standard labeling sold to other suppliers (65 series). You may receive the alternate part number since we still have both in stock.

    Very Important Note

    Our technical knowledge is limited on this product. Our sales staff are usually unable to answer many of the questions asked. Many of the questions are, "how do you install this distributor", "what model cars will this work in", "how do I wire it up" Most of the people on our sales staff simply don't know these answers, and even if we did, the time involved answering so many of these questions is what led us to writing this notice. We update info in our listings on a regular basis, and if it's not in the ad, then there's a good chance we don't know the info. There is a solution to this problem for those with numerous questions about the product. You have all heard the saying that a picture is worth a thousand words. Well, it is, and with that being said, a video is worth a million words. If you go to YouTube and type in key words such as, "How to install an HEI distributor" you will find dozens of highly informative videos showing the complete process step by step. These video are usually very accurate. We suggest that you watch several of them because some are easier to understand than others, and some have additional info in them that may not be covered in the others. You can't possibly go wrong watching these videos. At one time, we put installation instructions in our ads, and they led to much confusion for many, and the emails and calls coming were numerous. The videos on YouTube will be all you need. They are very simple and straightforward to follow. We did a search on the key words mentioned above, and literally hundreds of "how to" videos on every aspect of installing an HEI came up. There were even videos on changing over from a point distributor to an HEI.

      • We are not responsible for collateral damage caused by the use of this product.

      See all reviews

      Customer Reviews